Accessories

rounded element

More than just pedestals.

In today’s industry the strong demands of product quality and performance are at the sight of everyone’s for front. Being able to provide the highest quality pedestals and accessories means we can provide the whole package for our customers.

Speed Adjuster

Speed Adjuster

Screw into any drill, locate the top of the pedestal head for easy void adjustment on any pedestal. Made from hard wearing plastic, the adjuster has a long life. Proven to reduce effects of repetitive strain injury for raised access floor fitters. This product is the ultimate toolbox requirement for any experienced floor fitter.

Panel Lifter

Panel Lifter

Grainger’s raised floor lifting tool provides an easy way for installers to remove raised flooring panels. The two suction cups at each end of the lifter create a suction on the top of the panel and left with the handle. Making any removal of panels, for installation or maintenance of a project effortless. The lifter helps to prevent damage to the panel or any other remaining panels.

Polyfoam

Polyfoam

Self adhesive, PVC and nitrile closed cell foam tape is used to create an air tight fit to a perimeter wall avoiding any damage to wall or panel. A product that offers protection against condensation and air loss. Provides resistance to oils and chemicals. 19mm width by 10mm thick x 10m length.

Foil Tape

Foil Tape

Aluminium foil tape used to keep moisture from cut edges of panels. 50mm wide by 45metres length on roll. Can also be used in air conditioning and insulation sectors. Produced with one sided self-adhesive for a quick application and installation.

Fixing screws

Fixing screws

Grainger's offers a variety of quality fixing screws designed to be used in conjunction with our comprehensive pedestal range.

Panel Screws - M6 x 45mm

Countersunk screw designed to lay flush with the panel surface complete with a Pozidriv head for added torque and less possibility of cam-out. Supplied zinc plated as standard for added resistance to oxidation.

Metal Nailins - M6 x 40mm

Pre-assembled metal impact nail anchor used for quick and easy mechanical fixing of pedestal base to the substrate.

T-type Screw - ¼ BSW x 1.¼"

British Standard Whitworth mild steel countersunk screw designed to lay flush with the panel surface complete with a Pozidriv head for added torque and less possibility of cam-out. Supplied zinc plated as standard for added resistance to oxidation.

Stringer Screw - M4 x 15mm

Countersunk screw designed to lay flush with the stringer surface complete with a Pozidriv head for added torque and less possibility of cam-out. Height ranges are available if sufficient quantities justify special production.

Caps

Caps

Grainger’s range of plastic caps have a solution to every eventuality. By placing a cap onto the top of a pedestal it ensures the correct location of the panel. Whether you’re fitting a stringer system or just require a plain cap we have a cap to suit. Keeps electrical continuity through panel to the baseplate with brass insert. Made from 100% recycled Copolymer Polypropylene content. These caps are the most environmentally friendly on the market.

Please see our list of caps we can supply.

  • Full face 4 way
  • Full face 2 way
  • Stringer 4 way
  • Stringer 2 way
  • Plain cap with insert
  • Plain cap without insert
  • P cap
  • Chipboard cap
  • RRR 2 way
  • RRR 4 way

A cap for every eventuality!

Sealer

Sealer

Red Sealer

Grainger’s Red Sealer is a highly pigmented water based PVA floor sealer which may be applied by brush, spreader or roller. The XP2640 formulation contains no volatile solvents and also allows users to comply with the most recent environmental legislation.

Yellow Sealer

Grainger’s Yellow sealer is a highly pigmented water based PVA floor sealer which may be applied by brush, spreader or roller. The XP2641 formulation contains no volatile solvents and also allows users to comply with the most recent environmental legislation.

Ped Fix 1 Pedestal Adhesive

Ped Fix 1 Pedestal Adhesive

Grainger’s Ped Fix 1 is a one-component, ultra-low VOC, solvent free, polyurethane system specially formulated for fixing pedestals used in access flooring. When cured, Ped Fix 1 has excellent adhesion to concrete and other surfaces and to most materials likely to be used in the access flooring industry. Keeping pedestals locked in place at ease and providing stability for the rest of the floor.

Threadlock

Threadlock

In today’s’ industry the strong demands of product quality and performance are coupled with the equally strong demand for commercial competitiveness, as a consequence of these demands CAS 301LV was developed. Ideally suited for locking metal threads this product has found widespread use in many industries especially the raised access floor panel market.

Stringers

Stringers

Our pedestal stringers have been designed to meet the demanding requirements of the Access Flooring Industry.

2mm heavy duty stringer, U channel mild steel Astec 3000 with hook in location with screw-down facility.

1.5mm medium duty stringer, U channel mild steel Astec 3000 with hook-in location with screw-down facility.

Box stringer and bespoke sectional steels made to customers’ requirements.

All above is produced whisker free with our Astec 3000 finish as standard.